西门子传感器模块SMC30代理商6SL3055-0AA00-5CA2

西门子传感器模块smc30代理商6sl3055-0aa00-5ca2
6sl3055-0aa00-5ca2
sinamics 传感器模块 smc30 用于增量编码器:ttl/htl 或组合编码器 ssi,带 增量信号 或 ssi 编码器,无 增量信号/ 无 drive-cliq 电缆 30mm 结构宽度
列表价(不含税) 显示价格
您的单价(不含税) 显示价格
服务和支持 (手册,认证,问答...) 下载
该产品的培训课程 sitrain – 数字化工业学院
更多图片
产品
商品编号(市售编号) 6sl3055-0aa00-5ca2
产品说明 sinamics 传感器模块 smc30 用于增量编码器:ttl/htl 或组合编码器 ssi,带 增量信号 或 ssi 编码器,无 增量信号/ 无 drive-cliq 电缆 30mm 结构宽度
产品家族 未提供
产品生命周期 (plm) pm300:有效产品
价格数据
价格组 / 总部价格组 753
列表价(不含税) 显示价格
您的单价(不含税) 显示价格
金属系数 无
交付信息
出口管制规定 eccn : ear99h / al : n
工厂生产时间 10 天
净重 (kg) 0.41 kg
产品尺寸 (w x l x h) 未提供
包装尺寸 未提供
包装尺寸单位的测量 未提供
数量单位 1 件
包装数量 1
其他产品信息
ean 未提供
upc 662643432688
商品代码 85049099
lkz_fdb/ catalogid d21mc
产品组 5675
原产国 德国
compliance with the substance restrictions according to rohs directive rohs 合规开始日期: 2014.09.04
产品类别 a: 问题无关,即刻重复使用
电气和电子设备使用后的收回义务类别 是
分类
未提供
|
建议同时购买:
6sl3060-4aa10-0aa0sinamics drive-cliq 电缆 ip20/ip20 长度 0.95m
6sl3055-0aa00-6aa1sinamics drive-cliq 集线器模块柜 dmc20 不含 drive-cliq 电缆
6sl3055-0aa00-6ab0sinamics drive-cliq 集线器模块 dme20 防护方式 ip67 无 24v 电缆 无 drive-cliq 电缆
6sl3060-4ab20-0aa0sinamics drive cliq 电缆 ip20/ip20 长度:2100mm
1fk2103-2ag00-0da0simotics s-1fk2 hd 伺服电机 m0=0.64nm; pn = 0.2kw 当 nn=3000 rpm 时; 变频器,接入大 240v 电源: 防护等级 ip64; 圆柱形的轴 d14x30mm; 值编码器 20 位 + 12 位 多匝(编码器 am20dqc); 带 occ 接口 插头尺寸 m12,可旋转;
需要使用机柜安装式编码器模板 smc30 来分析不带 drive-cliq 接口的电机编码器。还可通过 smc30 连接外部编码器。
可以对下列编码器信号进行处理:
增量型编码器 ttl/htl,带/不带断路检测(断路检测只可使用双极信号)ssi 编码器,带 ttl/htl 增量信号ssi 编码器,无增量信号也可以使用 kty84-130 或 ptc 热敏电阻来检测电机温度。
设计
机柜安装式编码器模块 smc30 标准提供有下列接口:
1 个 drive-cliq 接口1 个编码器接口,包括电机温度检测(kty84-130 或 ptc),通过 sub-d 连接器连接或端子1 个电子装置电源接口,通过 24 v dc 电源连接器连接1 个 pe/保护导体连接机柜安装式传感器模块 smc30 的状态通过一个多色 led 来显示。
smc30 柜装式传感器模块可以安装在符合 en 60715 (iec 60715) 标准的 th 35 高帽型导轨上。
smc30 模板和编码器之间的大编码器电缆长度为 100 m。对于 htl 编码器,如果对信号 a+/a- 和 b+/b- 进行分析,并且电源电缆的小截面积为 0.5 mm2,则此电缆长度可增加到 300 m。
信号电缆屏蔽线可以借助一个屏蔽线接线端子连接在编码器模块 smc30 上,例如 phoenix contact 公司的 sk8 型号,或者 weidmüller 公司的 klbü 型号。
集成
西门子传感器模块smc30代理商6sl3055-0aa00-5ca2
机柜安装式传感器模块 smc30 通过 drive-cliq 与控制器 cu320-2 进行通讯。
技术规范
smc30 机柜安装式传感器模块
规定电流,大
24 v dc,
没有考虑到编码器
0.2 a
大导体截面积 2.5 mm2
熔断器保护,大 20 a
功耗
< 10 w
可评估的编码器
增量式编码器 ttl/htlssi 编码器,带 ttl/htl 增量信号ssi 编码器,无增量信号
输入阻抗
ttl 576 ohm
htl,大 16ma
编码器电源 24v dc/0.35 a 或 5v dc/0.35 a
编码器频率,大值 300 khz
ssi 波特率 100…250kbaud
频率范围 300 khz
分辨率位置 ssi 30 位
电缆长度,大值
ttl编码器 100 m(仅允许双极信号)1)
htl 编码器 100m,单极信号
300 m,双极信号1)
ssi 编码器 100 m
pe 连接
m4 螺钉
尺寸
宽 30 mm
高 150 mm
深 111 mm
重量,约
0.45 kg
认证,
标准
culus
通过 vsm10 电压检测模块,可以测量进线电压或输出电压特性。可在接地(交付时已插入跨接线)或隔离状态下对相位查分电压进行测量。
另外,vsm10 电压检测模块还可用于连接到旋转同步电机,或用于旋转感应电机的“快速捕捉再启动”。
设计
vsm10 电压感测模块具有以下接口:
1 个用于直接检测高达 690 v 电压的接口1 个用于通过电压互感器检测高 100 v 电压的接口1 点温度传感器输入(kty84‑130 或 ptc)1 drive-cliq 插座1 个供电接口,用于通过 24 v dc 电源连接器供电1 插入式跨接片,用于接地(交付时的状态)或隔离测量1 pe 连接vsm10 电压感测模块的状态由一个双色 led 来指示。
vsm10电压传感模块可卡到符合en60715(iec60715)根据标准的 th35安装导轨上。
集成
vsm10 电压检测模块通过 drive-cliq 与 cu320-2 控制单元通信。
vsm10 电压感测模块的连接示例
技术规范
vsm10 电压传感模板
功率需求(大)
24 v dc 时
0.2 a
导线横截面积(大值) 2.5mm2
功率损耗
< 10w
线路电压检查
未插入跨接片时的
中心点对地绝缘电阻 > 10mω
输入电阻
端子 x521 >362 kω/相
端子 x522 >2.5 mω/相
2 点模拟量输入
(预留用于监视装机装柜型调节型接口模块)
内部电阻(差分输入之间) 约 100kω
解决方法 12 位
pe 连接
外壳,使用 m4 螺钉
尺寸
宽度 50mm
高 150mm
深度 111mm
重量,约
0.9 kg
bop20 基本操作员面板操作员面板 aop30cbc10 通讯板cbe20 通讯板端子板 tb30终端模板 tm31电压检测模板 vsm10机柜安装式编码器模板 smc30信号电缆
tm31 terminal module
with the tm31 terminal module, the number of available digital inputs and outputs and the number of analog input and outputs within a drive can be expanded.
the tm31 terminal module also features relay outputs with changeover contact and a temperature sensor input.
设计the following are located on the tm31 terminal module:
8 digital inputs4 bidirectional digital inputs/outputs2 relay outputs with changeover contact2 analog inputs2 analog outputs1 temperature sensor input for kty84‑130, pt1000 or ptc (pt1000 can be used from firmware v4.7 hf17)2 drive‑cliq sockets1 connection for the electronics power supply via the 24vdc supply connector1 pe connectionthe status of the tm31 terminal module is indicated via a multi-color led.
the tm31 terminal module can be snapped onto a th35 standard mounting rail in accordance with en60715 (iec60715).
the signal cable shield can be attached to the tm31 terminal module via a shield connection clamp, e.g. type sk8 supplied by phoenix contact or type klbüco1 supplied by weidmüller. the shield connection clamp must not be used as a strain relief mechanism.
集成the tm31 terminal module can communicate via drive‑cliq with the following control units.
cu310‑2 control unitcu320‑2 control unitsinumerik control unitsimotion d control unitsinamics dcm advanced cud
connection example of tm31 terminal module
技术规范
tm31 terminal module
6sl3055-0aa00-3aa1
current requirement, max.
at 24vdc without taking account of the digital outputs and drive-cliq supply
0.5a
conductor cross-section, max. 2.5 mm2
fuse protection, max. 20 a
digital inputs
in accordance with iec61131‑2 type1
voltage -3...+30v
low level
(an open digital input is interpreted as low) -3...+5v
high level 15...30v
current consumption at 24vdc,typ. 9ma
delay times of digital inputs,1), approx.
l→h 50μs
h→l 100 μs
conductor cross-section, max. 1.5mm2
digital outputs
(continuously short-circuit proof)
voltage 24 v dc
load current per digital output, max. 100 ma
total current of digital outputs, max. 400 ma
delay times of digital outputs1)
typ. 150 μs with 0.5 a resistive load
max. 500 μs
conductor cross-section, max. 1.5mm2
analog inputs
a switch is used to toggle between voltage and current input
as voltage input
voltage range -10...+10v
internal resistanceri 100kω
resolution2) 11bits + sign
as current input
current ranges 4...20ma, -20...+20ma, 0...20ma
internal resistanceri 250ω
resolution2) 10bits + sign
conductor cross-section, max. 1.5mm2
analog outputs
(continuously short-circuit proof)
voltage range -10...+10v
max. load current -3...+3ma
current ranges 4...20ma, -20...+20ma, 0...20ma
load resistance, max. 500ω in the range -20...+20ma
resolution 11bits + sign
conductor cross-section, max. 1.5mm2
relay outputs
co contacts
max. load current 8 a
operational voltage, max. 250vac, 30vdc
switching capacity, max.
at 250vac 2000va (cos φ=1)
750va (cos φ=0.4)
at 30vdc 240 w (resistive load)
required minimum current 100 ma
conductor cross-section, max. 2.5 mm2
power loss, max.
10w
pe connection
m4 screw
dimensions
width 50mm (1.97in)
height 150mm (5.91in)
depth 111mm (4.37in)
weight, approx.
0.49kg (1.08 lb)
certificate of suitability
culus
tm150 terminal module
the tm150 terminal module is a drive-cliq component for temperature evaluation. the temperature is measured in a temperature range from -99°c to +250°c for the following temperature sensors:
pt100 (with monitoring for wire breakage and short-circuit)pt1000 (with monitoring for wire breakage and short-circuit, can be used from firmware v4.7 hf17)kty84 (with monitoring for wire breakage and short-circuit)ptc (with short-circuit monitoring)bimetallic nc contact (without monitoring)for the temperature sensor inputs, for each terminal block the evaluation can be parameterized for 1×2-wire, 2×2-wire, 3-wire or 4-wire. there is no galvanic isolation in the tm150 terminal module.
the temperature channels of a tm150 can be subdivided into 3groups and evaluated together.
设计the following are located on the tm150 terminal module:
6...12 temperature sensor inputs2 drive-cliq sockets1 connection for the electronics power supply via the 24 v dc supply connector1 pe connectionthe status of the tm150 terminal module is indicated via a multi-color led.
the tm150 terminal module can be snapped onto a th35 top-hat rail to en60715 (iec60715).
集成the tm150 terminal module can communicate via drive‑cliq with the following control units.
cu310‑2 control unitcu320‑2 control unitsinamics dcm advanced cud
connection example of a tm150 terminal module
技术规范
tm150 terminal module
6sl3055-0aa00-3la0
current requirement, max.
at 24vdc
0.5a
conductor cross-section, max. 2.5mm2
fuse protection, max. 20a
temperature sensor inputs
the inputs can be parameterized individually for the evaluation of sensors
conductor cross-section, max. 1.5 mm2
measuring current per sensor, approx. 0.8ma
power loss
1.6w
pe connection
m4 screw
dimensions
width 30mm (1.18in)
height 150mm (5.91in)
depth 111mm (4.37in)
weight, approx.
0.41kg (0.90 lb)
6gk1901-1bb30-0aa0
工业以太网 fastconnect rj45 插头 145 2x 2, rj45 插塞连接器 (10/100 mbit/s)含 坚固的金属外壳和 fc 连接系统,适用于 ie fc 电缆 2x 2; 145° 电缆出口 1 包 = 1 件
显示价格
6gk1901-1bb30-0ab0
工业以太网 fastconnect rj45 插头 145 2x 2, rj45 插塞连接器 (10/100 mbit/s)含 坚固的金属外壳和 fc 连接系统,适用于 ie fc 电缆 2x 2; 145° 电缆出口 1 包=10 件
数量单元:10
显示价格
6gk1901-1ga00
工业以太网 fastconnect 剥线工具, 剥线工具,用于 快速去除 ie fastconnect 电缆
显示价格
6xv1840-2ah10
工业以太网 fc tp 标准电缆,gp 2x2 (profinet 类型 a), tp 安装导线用于 连接至 ie fc rj45 2x2, 通用, 4 芯屏蔽 cat 5e, 按米销售,供货单位大 4000m 小订购量 20m
显示价格
6xv1840-3ah10
工业以太网 fc tp 拖曳电缆,2x2(profinet 类型 c), tp 安装导线用于 连接至 fc outlet rj 45, 适用于牵引链应用, 4 芯屏蔽,5 类, 按米销售(4 百万次弯曲循环), 供货单位,大 2000m, 小订货量 20m
显示价格
6xv1840-4ah10
工业以太网 fc tp 船用电缆, tp 安装导线用于 连接到 fc outlet rj45, 经过船级社认证,4 芯 屏蔽,5 类,按米销售, 大供货单位 1000 m, 小订购长度 20 m
显示价格
6xv1870-2b
工业以太网 fc tp 柔性电缆,gp 2x2 (profinet 类型 b), tp 安装电缆,带 柔性芯线,profinet 型号 b,4 芯屏蔽,5 类, 按米销售,供货单位大 2500m 小订货量 20m
显示价格
6xv1870-2d
工业以太网 fc tp 拖曳电缆 gp 2x2 (profinet c 型) tp 安装电缆,可在 牵引链应用,4 芯 5 类,按米销售(三百万次 弯曲循环),供货单位 大 1000m, 小订货量 20m
6gk1901-1bb30-0aa0
工业以太网 fastconnect rj45 插头 145 2x 2, rj45 插塞连接器 (10/100 mbit/s)含 坚固的金属外壳和 fc 连接系统,适用于 ie fc 电缆 2x 2; 145° 电缆出口 1 包 = 1 件
显示价格
6gk1901-1bb30-0ab0
工业以太网 fastconnect rj45 插头 145 2x 2, rj45 插塞连接器 (10/100 mbit/s)含 坚固的金属外壳和 fc 连接系统,适用于 ie fc 电缆 2x 2; 145° 电缆出口 1 包=10 件
数量单元:10
显示价格
6gk1901-1ga00
工业以太网 fastconnect 剥线工具, 剥线工具,用于 快速去除 ie fastconnect 电缆
显示价格
6xv1840-2ah10
工业以太网 fc tp 标准电缆,gp 2x2 (profinet 类型 a), tp 安装导线用于 连接至 ie fc rj45 2x2, 通用, 4 芯屏蔽 cat 5e, 按米销售,供货单位大 4000m 小订购量 20m
显示价格
6xv1840-3ah10
工业以太网 fc tp 拖曳电缆,2x2(profinet 类型 c), tp 安装导线用于 连接至 fc outlet rj 45, 适用于牵引链应用, 4 芯屏蔽,5 类, 按米销售(4 百万次弯曲循环), 供货单位,大 2000m, 小订货量 20m
显示价格
6xv1840-4ah10
工业以太网 fc tp 船用电缆, tp 安装导线用于 连接到 fc outlet rj45, 经过船级社认证,4 芯 屏蔽,5 类,按米销售, 大供货单位 1000 m, 小订购长度 20 m
显示价格
6xv1870-2b
工业以太网 fc tp 柔性电缆,gp 2x2 (profinet 类型 b), tp 安装电缆,带 柔性芯线,profinet 型号 b,4 芯屏蔽,5 类, 按米销售,供货单位大 2500m 小订货量 20m
显示价格
6xv1870-2d
工业以太网 fc tp 拖曳电缆 gp 2x2 (profinet c 型) tp 安装电缆,可在 牵引链应用,4 芯 5 类,按米销售(三百万次 弯曲循环),供货单位 大 1000m, 小订货量 20m
tm31 terminal module
with the tm31 terminal module, the number of available digital inputs and outputs and the number of analog input and outputs within a drive can be expanded.
the tm31 terminal module also features relay outputs with changeover contact and a temperature sensor input.
设计the following are located on the tm31 terminal module:
8 digital inputs4 bidirectional digital inputs/outputs2 relay outputs with changeover contact2 analog inputs2 analog outputs1 temperature sensor input for kty84‑130, pt1000 or ptc (pt1000 can be used from firmware v4.7 hf17)2 drive‑cliq sockets1 connection for the electronics power supply via the 24vdc supply connector1 pe connectionthe status of the tm31 terminal module is indicated via a multi-color led.
the tm31 terminal module can be snapped onto a th35 standard mounting rail in accordance with en60715 (iec60715).
the signal cable shield can be attached to the tm31 terminal module via a shield connection clamp, e.g. type sk8 supplied by phoenix contact or type klbüco1 supplied by weidmüller. the shield connection clamp must not be used as a strain relief mechanism.
集成
the tm31 terminal module can communicate via drive‑cliq with the following control units.
cu310‑2 control unitcu320‑2 control unitsinumerik control unitsimotion d control unitsinamics dcm advanced cudconnection example of tm31 terminal module
技术规范
tm31 terminal module
6sl3055-0aa00-3aa1
current requirement, max.
at 24vdc without taking account of the digital outputs and drive-cliq supply
0.5a
conductor cross-section, max. 2.5 mm2
fuse protection, max. 20 a
digital inputs
in accordance with iec61131‑2 type1
voltage -3...+30v
low level
(an open digital input is interpreted as low) -3...+5v
high level 15...30v
current consumption at 24vdc,typ. 9ma
delay times of digital inputs,1), approx.
l→h 50μs
h→l 100 μs
conductor cross-section, max. 1.5mm2
digital outputs
(continuously short-circuit proof)
voltage 24 v dc
load current per digital output, max. 100 ma
total current of digital outputs, max. 400 ma
delay times of digital outputs1)
typ. 150 μs with 0.5 a resistive load
max. 500 μs
conductor cross-section, max. 1.5mm2
analog inputs
a switch is used to toggle between voltage and current input
as voltage input
voltage range -10...+10v
internal resistanceri 100kω
resolution2) 11bits + sign
as current input
current ranges 4...20ma, -20...+20ma, 0...20ma
internal resistanceri 250ω
resolution2) 10bits + sign
conductor cross-section, max. 1.5mm2
analog outputs
(continuously short-circuit proof)
voltage range -10...+10v
max. load current -3...+3ma
current ranges 4...20ma, -20...+20ma, 0...20ma
load resistance, max. 500ω in the range -20...+20ma
resolution 11bits + sign
conductor cross-section, max. 1.5mm2
relay outputs
co contacts
max. load current 8 a
operational voltage, max. 250vac, 30vdc
switching capacity, max.
at 250vac 2000va (cos φ=1)
750va (cos φ=0.4)
at 30vdc 240 w (resistive load)
required minimum current 100 ma
conductor cross-section, max. 2.5 mm2
power loss, max.
10w
pe connection
m4 screw
dimensions
width 50mm (1.97in)
height 150mm (5.91in)
depth 111mm (4.37in)
weight, approx.
0.49kg (1.08 lb)
certificate of suitability
culus

机器阅读理解超越人类 云从刷新自然语言处理新纪录
防爆软管厂家的品质与服务哪个重要?
电动调节阀的六大作用你知道几个?
试验机的应用范围及维修保养
原来这就是固定源voc在线监测系统的检测对象啊!
西门子传感器模块SMC30代理商6SL3055-0AA00-5CA2
蔗糖水溶液的结冰机理
大量回收油脂厂设备榨油机
聚氨酯直埋式预制保温管专业生产技术分析
哈密地区“10T电子地磅称”国产“5T电子地磅秤”
扬尘在线监测系统‍的重要的组成部分介绍
罗茨鼓风机隔音罩
颗粒料螺旋加料输送机
久用的日本SMC电磁阀,如何进行研磨以确保良好的密封性
超临界流体色谱利用超临界流体作为移动相进行样品分离
预付费电表的接线办法及运用方法
高低温测试箱维护保养注意事项
超低温冷冻技术厂家分析制冷系统堵塞原因
螺旋绞龙的安装条件
代理KRACHT克拉克流量计VC0,04F1PS/71