What does the micro switch look like
there are many kinds of tact switches. among the mice, we also call them square jogs, and the thinner ones are called patch switches, which save more space than our common long jogs, and are common in delicate small mice. or the side button, the micro switch manufacturer will show you the details:
this kind of tact switch is small in size, which can save the space in the mouse to a large extent, but we can see that the pins are very different from our common micro-movements. the pressure is also hard enough. our most commonly used omron the pressure in grams of d2fc-f-7n is 0.74n (75gf), so it is rarely used on common mouse buttons. and we can also see its shortcomings, that is, the life span is slightly shorter, so placing it on the keys that are not commonly used can save space and reduce its frequency of use.
this kind of tact switch is slightly larger in size and smaller in grams of pressure. note that it is slightly smaller, but it also has 130gf. however, the biggest feature of it and the above two switches is that the life is much longer, that is, it is more durable. the pin type is s line.
this kind of tact switch is small and exquisite, and the contact part is covered with plastic, which can prevent the rosin from infiltrating during welding. the fixed frame type can be directly inserted into the pcb board. it has a good touch. the button has a variety of options. there is also a grounding pin type. , conducive to electrostatic discharge. in addition to being used in a mouse, it can also be used in electronic equipment such as telephones, stereos, and televisions, and has a wide range of uses.
the same is a square tact switch, but the difference is obvious, that is, the general life is longer, the reliability is higher, and the application range is wider. let's take a look below.
from the point of view of parameters, the pressure grams of this tact switch is closer to our daily use of micro-motion. this series of tact switches have basically fixed length and width dimensions, different heights, and different shapes of pins.
the size of the switch is higher, and the pin type is the 1 shape that we usually see, that is, straight up and down, which is more suitable for our commonly used mouse pcb boards. the installation position is also closer to the position of the left and right buttons, and is longer than that. the strip micro-movement saves more space. for example, the double-click button in the upper left corner of the left mouse button has a narrower location. this kind of touch switch is most suitable.
the shapes of these two switches are relatively different, and they will definitely not be seen on the left and right buttons, and they are often found in positions such as the side buttons. unlike razer’s nagavan snake, that kind of switch uses a thinner patch switch. most of these switches are side keys with a small number of side keys, which have a relatively long lifespan and a guaranteed feel.
ttc's 158 series switches are small in size, light in weight, very good in touch, and have an absolute advantage in terms of price. in addition to the mouse, it is also commonly used in electronic devices such as telephones, calculators, mixers, circuit breakers, battery chargers, stereos, cordless phones, alarms, etc., with a wide range of applications.
山东聊城祥云化工20吨导热油系统清洗工程结束
GJ41X铸铁夹管阀的工作原理和主要参数
决定模拟电源被数字电源取代的主要因素
西门子CPU 314C-2 DP6ES7314-6CH04-0AB0
三螺杆泵的优缺点
What does the micro switch look like
煤气点阀箱MG/B1-3煤气终端箱MV/B不锈钢液化气点阀箱产品特点
燃气报警器的校准标定步骤-逸云天
全铜内螺旋塞阀主要用于调节流体的流量
毛细管血液离心机功能安全可靠，噪音低
DG364-35哈威压力继电器的使用方法
如何操作直立式排污泵介绍
草莓冻干机市场需求
滚针轴承的拆卸方法有哪些？
谈一谈荣博源带式污泥脱水机的性能特点
大理石平台和铸铁平台有什么不一样呢？
新能源汽车发展前景及所需试验设备
智能气体涡轮流量计流量范围的确定考虑因素
QZM电动不锈钢渠道闸门特点分析
反应釜使用要求
this kind of tact switch is small in size, which can save the space in the mouse to a large extent, but we can see that the pins are very different from our common micro-movements. the pressure is also hard enough. our most commonly used omron the pressure in grams of d2fc-f-7n is 0.74n (75gf), so it is rarely used on common mouse buttons. and we can also see its shortcomings, that is, the life span is slightly shorter, so placing it on the keys that are not commonly used can save space and reduce its frequency of use.
this kind of tact switch is slightly larger in size and smaller in grams of pressure. note that it is slightly smaller, but it also has 130gf. however, the biggest feature of it and the above two switches is that the life is much longer, that is, it is more durable. the pin type is s line.
this kind of tact switch is small and exquisite, and the contact part is covered with plastic, which can prevent the rosin from infiltrating during welding. the fixed frame type can be directly inserted into the pcb board. it has a good touch. the button has a variety of options. there is also a grounding pin type. , conducive to electrostatic discharge. in addition to being used in a mouse, it can also be used in electronic equipment such as telephones, stereos, and televisions, and has a wide range of uses.
the same is a square tact switch, but the difference is obvious, that is, the general life is longer, the reliability is higher, and the application range is wider. let's take a look below.
from the point of view of parameters, the pressure grams of this tact switch is closer to our daily use of micro-motion. this series of tact switches have basically fixed length and width dimensions, different heights, and different shapes of pins.
the size of the switch is higher, and the pin type is the 1 shape that we usually see, that is, straight up and down, which is more suitable for our commonly used mouse pcb boards. the installation position is also closer to the position of the left and right buttons, and is longer than that. the strip micro-movement saves more space. for example, the double-click button in the upper left corner of the left mouse button has a narrower location. this kind of touch switch is most suitable.
the shapes of these two switches are relatively different, and they will definitely not be seen on the left and right buttons, and they are often found in positions such as the side buttons. unlike razer’s nagavan snake, that kind of switch uses a thinner patch switch. most of these switches are side keys with a small number of side keys, which have a relatively long lifespan and a guaranteed feel.
ttc's 158 series switches are small in size, light in weight, very good in touch, and have an absolute advantage in terms of price. in addition to the mouse, it is also commonly used in electronic devices such as telephones, calculators, mixers, circuit breakers, battery chargers, stereos, cordless phones, alarms, etc., with a wide range of applications.
山东聊城祥云化工20吨导热油系统清洗工程结束
GJ41X铸铁夹管阀的工作原理和主要参数
决定模拟电源被数字电源取代的主要因素
西门子CPU 314C-2 DP6ES7314-6CH04-0AB0
三螺杆泵的优缺点
What does the micro switch look like
煤气点阀箱MG/B1-3煤气终端箱MV/B不锈钢液化气点阀箱产品特点
燃气报警器的校准标定步骤-逸云天
全铜内螺旋塞阀主要用于调节流体的流量
毛细管血液离心机功能安全可靠，噪音低
DG364-35哈威压力继电器的使用方法
如何操作直立式排污泵介绍
草莓冻干机市场需求
滚针轴承的拆卸方法有哪些？
谈一谈荣博源带式污泥脱水机的性能特点
大理石平台和铸铁平台有什么不一样呢？
新能源汽车发展前景及所需试验设备
智能气体涡轮流量计流量范围的确定考虑因素
QZM电动不锈钢渠道闸门特点分析
反应釜使用要求