How to use pneumatic diaphragm pump well?
when using pneumatic diaphragm pump to operate, pay attention to the following points:
1. ensure that the maximum particle contained in the fluid does not exceed the maximum safe particle diameter standard of the pump.
2. the inlet pressure shall not exceed the maximum allowable pressure of the pump. compressed air higher than the rated pressure may cause personal injury, property loss and damage to the performance of the pump.
3. ensure that the pipeline system with pump pressure can bear the maximum output pressure, and ensure the cleanliness and normal working conditions of the driving gas circuit system.
4. electrostatic spark may cause explosion, resulting in personal casualty accidents and property losses. use wires with large cross-sectional area as required to properly and reliably ground the grounding screw on the pump.
5. the grounding requirements shall comply with local laws and regulations and some special requirements on site.
6. fasten the pump and all connecting pipe joints to prevent electrostatic sparks caused by vibration, impact and friction. use antistatic hose.
7. to periodically check and test the reliability of the grounding system, the grounding resistance is required to be less than 100 ohms.
8. keep good exhaust and ventilation and keep away from inflammables, explosives and heat sources.
9. the exhaust of the pump may contain solids. do not face the exhaust port to the working area or people to avoid personal injury.
10. when the diaphragm fails, the conveyed material will be ejected from the exhaust muffler.
11. when transporting flammable and toxic fluids, please connect the discharge port to a safe place away from the work area.
12. connect the exhaust port to the muffler with a pipe with a smooth inner wall of at least 3 / 8 inner diameter.
13. the high pressure of fluid may cause serious personal injury and property loss. please do not carry out any maintenance work on the pump and material pipe system when the pump is pressurized. if maintenance is required, first cut off the air inlet of the pump, open the bypass pressure relief mechanism to relieve the pressure of the pipeline system, and slowly loosen the connected pipe joints.
14. if the pump is used to transport harmful and toxic fluid, please do not send the pump directly to the manufacturer for repair. properly handle according to local laws and regulations, and use pure accessories of shanghai wangquan pump co., ltd. to ensure service life.
15. for the pump with aluminum alloy material used in the liquid delivery part, please do not use it to deliver the liquid containing fe3 + and halogenated hydrocarbon and other halogenated hydrocarbon solvents, which will cause corrosion and burst of the pump body.
16. ensure that all parts contacting the conveying body will not be corroded and damaged by the conveying fluid.
17. ensure that all operators are familiar with the operation and use and master the precautions for safe use of the pump, and provide necessary protective articles if necessary.
18. the pump shall be used correctly, and long-term idling is not allowed.
【折盖封箱机】折盖封箱机使用的具体步骤
推送：高速公路自动气象站—货真价实的路面监测系统
易拉罐粉碎机生产应用中就注意的问题
DOTA PEG4 Amine，DOTA四聚乙二醇氨基，用于成像诊断领域的生物偶联
诸城市海瑞环保为您分享宾馆污水处理设备
How to use pneumatic diaphragm pump well?
反渗透技术优势赋能 开辟海水淡化新水源
车铣复合机床刀柄的选择方法
FAT-II伏安特性综合测试仪的特点及技术参数
弄明白这几个参数，干式恒温仪的选购肯定不会出错
常见的几种溶解氧测定仪测定原理分析
等离子净化器适用于工业废气净化处理
真空圆盘过滤机检修
GJ03-2308激光粒度分析仪详细说明
浅析建筑工地用绿色盖土网的好处
粉尘检测仪的功能特点和主要应用场所，知道总比不知道好
安全阀使用注意事项及安装说明解析
硝酸流量计，防腐钽电极硝酸流量计厂家
如何做好振动筛的定期检修工作
浅述进口材料试验机发生故障的原因与其解决方法
1. ensure that the maximum particle contained in the fluid does not exceed the maximum safe particle diameter standard of the pump.
2. the inlet pressure shall not exceed the maximum allowable pressure of the pump. compressed air higher than the rated pressure may cause personal injury, property loss and damage to the performance of the pump.
3. ensure that the pipeline system with pump pressure can bear the maximum output pressure, and ensure the cleanliness and normal working conditions of the driving gas circuit system.
4. electrostatic spark may cause explosion, resulting in personal casualty accidents and property losses. use wires with large cross-sectional area as required to properly and reliably ground the grounding screw on the pump.
5. the grounding requirements shall comply with local laws and regulations and some special requirements on site.
6. fasten the pump and all connecting pipe joints to prevent electrostatic sparks caused by vibration, impact and friction. use antistatic hose.
7. to periodically check and test the reliability of the grounding system, the grounding resistance is required to be less than 100 ohms.
8. keep good exhaust and ventilation and keep away from inflammables, explosives and heat sources.
9. the exhaust of the pump may contain solids. do not face the exhaust port to the working area or people to avoid personal injury.
10. when the diaphragm fails, the conveyed material will be ejected from the exhaust muffler.
11. when transporting flammable and toxic fluids, please connect the discharge port to a safe place away from the work area.
12. connect the exhaust port to the muffler with a pipe with a smooth inner wall of at least 3 / 8 inner diameter.
13. the high pressure of fluid may cause serious personal injury and property loss. please do not carry out any maintenance work on the pump and material pipe system when the pump is pressurized. if maintenance is required, first cut off the air inlet of the pump, open the bypass pressure relief mechanism to relieve the pressure of the pipeline system, and slowly loosen the connected pipe joints.
14. if the pump is used to transport harmful and toxic fluid, please do not send the pump directly to the manufacturer for repair. properly handle according to local laws and regulations, and use pure accessories of shanghai wangquan pump co., ltd. to ensure service life.
15. for the pump with aluminum alloy material used in the liquid delivery part, please do not use it to deliver the liquid containing fe3 + and halogenated hydrocarbon and other halogenated hydrocarbon solvents, which will cause corrosion and burst of the pump body.
16. ensure that all parts contacting the conveying body will not be corroded and damaged by the conveying fluid.
17. ensure that all operators are familiar with the operation and use and master the precautions for safe use of the pump, and provide necessary protective articles if necessary.
18. the pump shall be used correctly, and long-term idling is not allowed.
【折盖封箱机】折盖封箱机使用的具体步骤
推送：高速公路自动气象站—货真价实的路面监测系统
易拉罐粉碎机生产应用中就注意的问题
DOTA PEG4 Amine，DOTA四聚乙二醇氨基，用于成像诊断领域的生物偶联
诸城市海瑞环保为您分享宾馆污水处理设备
How to use pneumatic diaphragm pump well?
反渗透技术优势赋能 开辟海水淡化新水源
车铣复合机床刀柄的选择方法
FAT-II伏安特性综合测试仪的特点及技术参数
弄明白这几个参数，干式恒温仪的选购肯定不会出错
常见的几种溶解氧测定仪测定原理分析
等离子净化器适用于工业废气净化处理
真空圆盘过滤机检修
GJ03-2308激光粒度分析仪详细说明
浅析建筑工地用绿色盖土网的好处
粉尘检测仪的功能特点和主要应用场所，知道总比不知道好
安全阀使用注意事项及安装说明解析
硝酸流量计，防腐钽电极硝酸流量计厂家
如何做好振动筛的定期检修工作
浅述进口材料试验机发生故障的原因与其解决方法